Sesame seeds are wealthy in nutrients and are widely used in the food and wellness business. For example, sesame seeds are relevant in sesame paste, and sesame seeds are for making important oils for body therapeutic massage. Briefly, the sesame seed cleaning and peeling machine is the best choice for washing and peeling sesame seeds, pumpkin seeds, and different comparable seeds. The sesame seed cleaning peeling machine primarily consists of reducer, tank, compound agitator, separating sieve plate, water including pipeline, and each inlet and outlet. The fabric is soaked by including a certain amount of caustic soda to the new water. The reducer drives the stirrer to rotate. As a result of structural traits of the compound stirrer, the material is circulated up and down and turned over. So, the mixture of sesame and infusion liquid is even and adequate. Using the relative friction between the stirrer and sesame seeds and between sesame seeds and sesame seeds, the sesame seeds are separated from the kernel, in order to attain the aim of sesame peeling.
Using the intercepting effect of the separation sieve plate, the inside skin of sesame is separated and discharged, whereas the sesame kernel is intercepted, in order to attain the purpose of sesame skin-kernel separation. How one can operate the sesame seed cleaning and peeling machine? As an expert sesame peeling machine supplier, we, firstly, do some preparations. Material: 80-120kg of water at 60 degrees Celsius, 40-60kg of dry sesame, 1-1.5kg of soda ash. 1. Heat scorching water with flake soda, put dry sesame seeds and stir well, soak for 10-thirteen minutes, take out and drain. 2. Add the drained sesame seeds to the peeling machine when it is on, and peel them for 3-5 minutes. 3. Add about 1/3 of water to the washing peel bucket first to stop the sesame skins from blocking the mesh gap. Turn on the operation, then open the gate of the peeling barrel. At a later stage, when the sesame seeds can’t be stirred out automatically, open the pro-water valve to flush out the residual sesame seeds. 4. Wash the peel bucket stirring for 5-10 minutes. After viewing the plain separation of pores and skin and kernel, open the underside drain valve slightly, and open the inlet water valve in equal amounts. Make the sesame seed skin with the water discharge. About 5-10 minutes after the drainage port, no skin, close the drainage valve. Open the discharge gate.
